Building ProductsSystem

 

System Family of Roofing Profiles

Ryerson is pleased to offer AlumaKlad and ColorKlad in five attractive roofing profiles- Systems 1-5. These are the same high-quality, pre-painted architectural roofing products you've specified for years - all in simple, easy-to-install systems. Roofing profiles are also available in Copper.

View System Family of Profiles Insert

All five systems offer these advantages:

  • AlumaKlad is made of 70% Kynar 500 or Hylar 5000 coating over a high quality primer, permanently bonded to 3105-H24 aluminum sheet or coil.
  • ColorKlad is made of BASF Fluoroceram 70% Kynar 500 or Hylar 5000 coating over high quality primer, permanently bonded to commercial quality, extra smooth G90 galvanized steel or AZ50 Galvalume® sheet or coil.
  • ColorKlad is available in 30 colors and AlumaKlad is available in 20 colors, shown in the chart below.
  • Designed for full roofing installations, including mansards, fascias and any special effects.
  • Each panel packaged with a strippable film for added protection during shipping and installation.
  • Carefully crated for easy shipment; can be drop shipped directly to the job site.
  • Panels packaged in crates for easy handling upon receipt.
  • A full, 30-year, non-prorated finish warranty and an optional weathertightness warranty.
Standard colors:
Aged Copper*
Almond*
Banner Red*
Bone White*
Cape Blue
Champagne
Charcoal Gray
Classic Green*
Colonial Red*
Copper Penny*
Cordovan
Dark Bronze*
Hartford Green*
Mansard Brown*
Matte Black*
Musket Gray
Pacific Blue*
Red Clay
Roman Bronze*
Royal Blue
Sage
Seaport*
Sierra Tan*
Silver*
Slate Blue
Slate Gray*
Stone White*
Teal Green
Terra Cotta*
Winter White*

*AlumaKlad colors

View full set of all five System drawing packets — PDF (5,382 kb)

Written specifications for each of these systems can be obtained from your regional sales representative or by contacting Ryerson.

Optional rib stiffeners may be added to change the appearance or structural performance on any of these five panel systems.

 

SYSTEM 1

 

  Pre-formed pans with no left or right, top or bottom, for fast and easy installation. Special formed, double hem, standing seam cap, in 1'' and 1-1/2'' heights, that locks on and stays on. The 24- or 26-gauge G-90 clips are suitable for most applications.
CAD Drawing—View System 1 packet — PDF (826 kb)
 
 

SYSTEM 2

 
 
An integral seam design that goes together in a snap. A versatile profile used extensively in residential and light commercial roofing applications. A high-performance standing seam system capable of transitional changes in a continuous panel length for roof, mansard and fascia applications.
CAD Drawing—View System 2 packet — PDF (828 kb)
   
 

SYSTEM 3

 
  A mechanically seamed panel system that can be single- or double-locked on the job site to ensure high quality and performance.
CAD Drawing—View System 3 packet — PDF (1,119 kb)
   
 

SYSTEM 4

 
  High-performance roofing product with the aesthetics of a traditional standing seam panel. A 1-3/4'' seam height and unique male/female interlocking joint design makes installation quick and simple. A totally integrated roof system with optional factory-installed sealant for additional weather and water protection. A complete series of engineered clips allows this system to be used in a variety of applications — i.e., plywood decking, insulation or open framing.
CAD Drawing—View System 4 packet — PDF (840 kb)
   
 

SYSTEM 5

 
  The ultimate in high performance roofing systems with a field-seamed and factory caulked 2" seam. Can be used on both new and retrofit projects having pitches as low as 1/2" in 12". The two-piece, factory caulked sliding clip allows the panel system to float relative to the support structure. It can be applied to a variety of substrates, including plywood, insulation and open framing.

CAD Drawing—View System 5 packet — PDF (1,140 kb)